BETA 85T Marine Diesel Engine Specifications, Our engine range is based upon the most technically advanced Kubota diesels that give you very smooth, quiet power, right through the speed range. The engine design includes reliable gear driven injection pump and camshaft governing for maximum reliability & maintenance serviced by trained technicians at Santa Barbara Marine Diesel Mechanic. servicing, Ventura, Oxnard, Channel Islands Harbor & Santa Barbara.
Specifications:
Power @ 2,800 rpm: 62.0 kW85 hp
Aspiration: Turbocharged
Cylinders: 4
Displacement: 3331 cc203 in3
Weight: 359 kg792 lbs
Transmission: TM345 (Standard)
Alternator: 70 Amp (Standard)
STANDARD SPECIFICATIONS:
- EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant Recreational Use.
- Mechanically governed comes with:
- Heat exchanger, header tank and water-cooled exhaust manifold.
- Fresh and sea water pump, injection bend for a wet exhaust.
- Mechanical fuel lift pump, fuel and oil filtration.
- Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
- Special quiet air intake filter.
- 70 Amp, 12 Volt battery charging alternator.
- BETA 85T Marine Diesel Engine Specifications
- Complete with ‘C Deluxe’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternator ‘no charge; 3m interconnection cable with multi-pin plug connector.
- Heavy duty engine feet and flexible mountings.
- ‘Morse’ type end fittings for engine speed and transmission control.
- Engine test certificate and operator’s manual.
- Beta red paint.
CUSTOM ENGINE MOUNTS
Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However, engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing engine mounts to suit your individual engine bearers.
Having designed, manufactured and supplied thousands of bespoke engine mounts when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labor. Find out more
BETA 85T Marine Diesel Engine Specifications
The BETA 85T marine diesel engine is renowned for its reliability, efficiency, and robust performance, making it an excellent choice for a wide range of marine applications. At 805 Marine Mechanic, we provide detailed specifications and expert services for the BETA 85T to ensure optimal operation and longevity.
General Specifications
- Engine Model: BETA 85T
- Configuration: Inline 4-cylinder, 4-stroke
- Displacement: 3.8 liters
- Bore x Stroke: 100 mm x 105 mm
- Aspiration: Turbocharged
- Cooling System: Freshwater cooled with heat exchanger
- Fuel System: Direct injection
- Engine Weight (Dry): Approximately 370 kg (815 lbs)
Performance Specifications
- Rated Power Output: 85 hp (63 kW) at 2800 RPM
- Maximum Torque: 231 Nm at 1600 RPM
- Fuel Consumption:
- Approx. 11 liters/hour (2.9 gallons/hour) at maximum output
- Emissions Compliance: Meets relevant marine emissions standards
Dimensions
- Length: 889 mm (35 in)
- Width: 587 mm (23.1 in)
- Height: 734 mm (28.9 in)
Key Features
- Durable Construction: High-strength components for enhanced durability and reliability.
- Turbocharging: Turbocharged for improved performance and fuel efficiency.
- Freshwater Cooling: Equipped with a heat exchanger for efficient cooling.
- Direct Injection: Direct fuel injection for better combustion and efficiency.
- Compact Design: Compact and lightweight for easy installation and maintenance.
Applications
- Sailboats: Ideal for mid-sized to larger sailboats.
- Motorboats: Suitable for a variety of motorboats and small commercial vessels.
- Auxiliary Power: Can be used as an auxiliary engine for larger vessels.
Maintenance Recommendations
- Oil and Filter Changes: Every 250 hours or annually, whichever comes first.
- Fuel Filter Replacement: Every 500 hours or annually.
- Coolant System: Inspect and maintain coolant levels and replace coolant every 2 years.
- Air Filter: Inspect and replace as needed, typically every 500 hours.
- Turbocharger Inspection: Check for wear and clean every 1000 hours.
- Valve Adjustment: Every 1500 hours.
- Belt Inspection: Regularly check and replace belts as needed.
Optional Features
- Keel Cooling: Available for applications where seawater cooling is not preferred.
- Engine Monitoring Systems: Options for advanced engine monitoring and diagnostics.
- Custom Configurations: Various configurations available to meet specific vessel requirements.
For detailed service and maintenance schedules or to inquire about specific configurations and additional options, contact 805 Marine Mechanic:
Why Choose 805 Marine Mechanic?
- Expert Technicians: Certified marine mechanics with extensive experience in maintaining and servicing BETA marine engines.
- Quality Parts: We use only genuine BETA parts and high-quality fluids to ensure optimal performance and longevity.
- Comprehensive Services: From routine maintenance to complex repairs, we provide a full range of services to keep your engine running smoothly.
- Customer Satisfaction: Dedicated to providing exceptional service and ensuring your complete satisfaction.
- Mobile Services: Offering convenient mobile services to perform maintenance and repairs at your location.
One Response