Marine Engine Fresh Water Flushing System, without correct maintenance the cooling system within your marine engine can quickly block with salt deposits and if left can cause serious damage.
Not only will salt corrosion eat away the inside of your engine but it also restricts the water flow resulting in ineffective heat exchange that can lead to serious overheating issues. Here at Santa Barbara marine diesel mechanic,
the best way to keep your marine engine cooling system maintenance to a minimum, is to flush your engines saltwater system after each use with a fresh water flushing system,
we custom designed a Fresh water flushing system. a couple years back and have installed many of them in all different size vessels with great success,
convenience and ease of use are its top features, best in the business for Fresh water flushing systems.
SB marine mechanic installed a custom, Fresh water flushing system. a couple months back for a customer where the water pressure at the dock was sufficient enough were we used a single quick connect to be able to flush 2 main engines and a generator all at the same time.
freshwater flushing is an important maintenance practice. saltwater marine organisms can cause clogs in the engine, and saltwater or brackish water can cause corrosion. Flushing your marine engine with fresh water will help prevent these issues.
-
Flush your boat engines safely and easily
-
Convenient outside quick connect, No need to drag hose into engine room
-
No need to enter engine room to shut off (Seacock)
-
Check valve automatically shuts off hull intake of saltwater when freshwater water pressure is applied.
-
Spring loaded check valve prevents air from entering the system.
INSTRUCTIONS:
-
Connect while engine is running.
-
turn on fresh water allow to flush for 5 minutes.
-
shut off engine and turn off fresh water.
-
it’s that simple.
A basic freshwater flushing setup will include a through-hole, seacock, elbow, hose, sea strainer, freshwater flush fitting and a hose connected to the pump.
The most important factor to consider when placing the freshwater connection is where it will be most convenient for you to access — if it’s easy to get to, you will be more likely to perform the flush on a regular basis and thereby extend the life of your engine.
Marine Engine Fresh Water Flushing System, If you do have a lift muffler, you will need to be careful about how you perform the flush.
Rates:
based on materials & labor $150 hr.
all parts are OEM Manufactured parts
Why Every Boat Owner Should Flush Their Marine Engine with Fresh Water: Insights from 805 Marine Mechanic
Owning a boat brings endless joy and adventure, but it also comes with the responsibility of proper maintenance to ensure longevity and peak performance. One crucial step often overlooked is flushing your marine engine with fresh water after each use. This simple practice has numerous benefits, especially for those who frequently navigate saltwater. In this article, we’ll delve into the reasons why every boat owner should adopt this habit, and how it can protect essential components like the saltwater pump, heat exchanger, oil cooler, transmission oil cooler, after cooler, and inner cooler. Stay tuned to discover expert insights from 805 Marine Mechanic on how this small step can prevent costly repairs and keep your boat running smoothly.
Importance of Flushing Your Marine Engine
Protect Your Saltwater Pump
Flushing your marine engine with fresh water is crucial for safeguarding your saltwater pump. Saltwater can corrode and damage the internal components of the pump, leading to decreased efficiency and eventual failure. By regularly flushing the engine, you remove salt deposits and other contaminants that can accumulate over time. This simple maintenance routine helps maintain the integrity of the pump, ensuring it continues to function correctly. Proper care of the saltwater pump not only extends its lifespan but also helps maintain the overall performance of your marine engine. Remember, a well-maintained saltwater pump is essential for a trouble-free boating experience. By following the advice from 805 Marine Mechanic, you can avoid costly repairs and keep your boat in prime condition.
Extend Heat Exchanger Life
Flushing with fresh water is vital for extending the life of your heat exchanger. Saltwater leaves behind salt and mineral deposits that can clog and corrode the heat exchanger’s tubes. Over time, this buildup restricts water flow and reduces cooling efficiency, leading to engine overheating. By routinely flushing your engine, you can effectively remove these deposits, ensuring optimal performance and longevity of the heat exchanger. A well-maintained heat exchanger contributes to the overall health of your marine engine, preventing costly breakdowns and repairs. 805 Marine Mechanic emphasizes the importance of this simple but effective maintenance step to keep your boat running smoothly. Regular flushing not only protects your heat exchanger but also enhances the reliability of your entire cooling system.
Safeguard Oil Cooler Function
Flushing your marine engine with fresh water is essential for safeguarding the function of the oil cooler. The oil cooler plays a crucial role in maintaining the engine’s oil at the proper temperature, ensuring efficient lubrication and preventing overheating. Salt and debris from saltwater can accumulate in the oil cooler, causing blockages and reducing its cooling efficiency. Regular flushing removes these harmful deposits, preserving the oil cooler’s performance and preventing potential engine damage. By keeping the oil cooler in optimal condition, you ensure that your boat’s engine runs smoothly and efficiently. 805 Marine Mechanic recommends this straightforward maintenance practice to avoid costly repairs and extend the life of your marine engine. Regular attention to the oil cooler can make a significant difference in the overall health of your boat, providing peace of mind during your adventures on the water.
4 Responses